The ESM agitator system

Use: For mixing or agitating with low RPMs but higher circulation for low to medium viscous fluids.

Drive: PAGERIS® electrical motors are offered as 3 phase (400V, 50Hz) or 1 phase (230V, 50Hz) asynchronous motors, compliant with IEC-standards. Power ranges from 0.12 up to 4 kW and possible RPMs are 1500, 1000, 750 and 1500/750. Protection classifications are up to IP55, insulation classes up to F and duty cycles up to S1 (continuous duty). The standard motor design is B5. Special versions are available on request. Worm drives tailored to PAGERIS® motors compliant with IEC-standards: Standard reduction is 1:20. Special versions are available on request.

Shaft: Lengths from 500 to 4000mm in stainless steel 1.4435 with PE coating (on request). For coated shafts, we offer protected coupling guards and lids.

Vanes: Broad range in PVDF, PP and stainless steel 1.4571 from 300 to 1200mm diameter available with 6 vanes (SR-6). Also available with 3 or 2 vanes (SR-3/SR-2) with optional hinges but in stainless steel only.

Accessories: Inverter, sealing flange, radial shaft seal, transition flange, IBC lid with integrated sealing flange, IBC agitator system traverse, coupling guard etc.

The EVGK rabble rake

Use: For extremely low RPMs, mainly used in water treatment and purification. Can be fitted with screens.

Drive: PAGERIS® electrical motors are offered as 3 phase (400V, 50Hz) asynchronous motors, compliant with IEC-standards. Power ranges from 0.18 up to 0.37 kW at 1500 RPM. Protection classifications are up to IP55, insulation classes up to F and duty cycles up to S1 (continuous duty). Sealing and mounting flanges in PP.

Worm drives tailored to PAGERIS® motors compliant with IEC-standards. Rake speeds are from 0.08 to 0.32 RPMs, stepless, with torque limiter.

Shaft: In stainless steel 1.4435 with 40 or 60mm diameter. With 0.18 kW length is up to 3000mm, with 0.37 kW length is up to 4000mm.

Vanes: Upper and lower links both in stainless steel 1.4571. Upper link lengths for 30° or 45° configuration of the screens are 1500 to 2500mm (0.18 kW) or 2000 to 3000mm (0.37 kW). Lower link lengths are 760 to 1060mm for all configurations.

Bearing: Available in PP or in PTFE